Lot of 50 DTECH USB TO TTL SERIAL UART CABLE 6'

Description

This auction is for a lot of 50:
DTECH USB TO TTL SERIAL UART CABLE 6'
DTECH USB to TTL Serial Adapter 3.3V Debug Cable TX RX Signal 4 Pin Female Socket PL2303 Prolific Chip Windows 10 8 7 XP Vista
Product Origin:China
Brand:DTECH
Item NO.:DT-6553
Shipping Port:Guangzhou/Shenzhen
Color:As Picture
Payment:T/T
CONTACT US
PRODUCT DETAILS
1. Description
DTECH USB to TTL serial UART converter cable provides a fast, simple way to connect devices with a 3.3V TTL level serial interface to USB port. It integrates PROLIFIC PL2303TA USB to serial UART interface IC device.
The PL2303TA chip used is housed within the USB A connector. The cable is terminated with a 4 pin 0.1 inch pitch header socket which provides access to the transmit (Tx), receive (Rx), VCC and GND connections.
The USB serial converter cable required USB driver, available from prolific website (https://prolificusa.com/product/pl2303ta-usb-serial-uart-bridge-controller/),  which are used to make the PL2303TA on the PCB board appear as virtual COM port (VCP driver). It allows users to communicate with the USB interface via a standard PC serial emulation port.
2. Features
l USB 2.0 full speed, back compatible with USB1.1, USB1.0
l PL2303TA chip on PCB board
l PCB board pinout (USB end): TXD, RXD, CTS, RTS, VCC, GND
l 4 pins wired (2.54mm header end): TXD, RXD, VCC, GND
l VCC supports 3.3V and 5V supply output
l UART interface supports 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity
l Serial data transfer rates up to 3M
l Internal EEPROM with users writable area
l Data signal levels: +3.3v or +5v optional
l Support VID, PID and other reprogrammed function
l USB bus powered, no extra power required
l Low PC USB bandwidth consumption
l Range -104℉ to +185℉operation temperature
3. Driver support
l Windows 10, 8, 8.1, 7 32, 64-bit
l Windows XP and XP 64-bit
l Windows Vista and Vista 64-bit
l Windows 2000SP4 & Server2003
l Windows Server 2016, Server2008, 2008R2, 2012, 2012R2
l Auto-download driver via Windows Update (Windows 7, 8.1, 10)
Description
6-Foot PL2303TA chip USB to TTL serial adapter cable for 3.3 V logic level serial communication (rx, tx, vcc and GND)
The USB TLL serial converter is built with Prolific PL2303 chip, FTDI’s royalty-free VCP allow for communication as a standard COM port; a great conversion data cord to meet with your needs of debugging, boot-loading, programming, etc.
Applications:
Upgrading Legacy Peripherals to USB
Interface Microcontroller UART or I/O, FPGA / PLD to USB
Industrial Control
USB Software / Hardware Encryption Dongles
...
Features
- The I/O pins of the wire are configured to operate at 3.3V logic level - Entire USB protocol handled by the electronics in the cable;
- UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity;
- Data transfer rates from 300 to 3M baud rate at TTL levels;
- Internal EEPROM with users writable area; - Supply voltage comes from USB bus, no external supply required;
- UHCI / OHCI / EHCI host controller compatible
Specific Interface A: USB 2.0 type A Male Port
Interface B: 4 pin Female Socket flying leads
Chip: Prolific PL2303TA Supports Windows 2008, XP and XP 64-bit, Vista and XP 64-bit, CE 4.2, 5.0 and 6.0; Windows 7, 8, 8.1, 10 (32 and 64-bit);
Cable Colour: Black Wire Length: 1-Meter What’s Included
1x USB to Serial TTL Level Converter Cable 6 ft
1x User Manual
Features & details
3ft PL2303 USB to TTL serial adapter 3V3 (with 4 pin 0.1” pitch female header socket) connects devices with 3.3 V logic level UART signals interface to a laptop via USB port
A genuine PL2303TA chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates
6 feet USB to TTL serial cable 3.3V (4 way output flying leads ) provides access to UART (transmit) Tx, (receive) Rx, VCC (5V) and GND
Prolific chipset on the PCB board has configurable internal EEPROM and UART signals can be individually inverted by configuring the EEPROM
4 pin TTL to USB Converter cord is compatible with Windows 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE; ideal USB 2.0 debug cord for Vendor ID re-write, router, GPS, set top box, transmitter, flash firmware on hard drive, etc.